What Should I Do If The Brick Machine Pallet Warps During Use?

​Sometimes the brick machine pallet warps during use, which will seriously affect the use of the product. Let's take a look at the causes and solutions to this problem.

Warping of brick machine pallets generally occurs due to the following reasons: inappropriate adhesive ratio, inappropriate hot pressing conditions, asymmetry of the brick machine pallets glued on the surface and back, high moisture content of brick machine pallets, drying shrinkage, etc.

Then after we find the real cause, we must take a reasonable approach to solve it:

When manufacturing pallets for brick machines, the amount of urea-formaldehyde resin glue should be reduced to make the glue layer softer, and the hot pressing conditions should be improved. After hot pressing, the brick machine pallet should be stacked horizontally and pressed with heavy objects. The fiber direction of the brick machine pallet should be parallel to the direction of the substrate's shrinkage and small wet expansion. When gluing, the brick machine pallet should be squeezed as tight as possible, and the middle part should be slightly loose. When manufacturing brick machine pallets, reduce the moisture content of the brick machine pallet and ensure its uniformity.

After solving the warping problem of the brick machine pallet, it can be put into normal use. At the same time, you need to know that you must conduct regular inspections and maintenance on a daily basis, and solve problems in a timely manner when they are discovered, so as not to delay the next use.